Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Author/Submitter: A.
Posner (02/12/97)
Document Released: 02/12/97
Product Family: Imagesetters / Platesetters
The Dolev 4press CPU 386 Adaptor cat. # 507D2G704 is an assembly of the 386 CPU board and an adaptor.
The CPU board cat. # 503C39543 is setup as follows:
(Note : The board is setup in the production line. Setup is needed only in cases of problems.)
The board setup:
CHIPS SCAT sx/PEAKsx BIOS Version 3.0.2 1994.1.26
First page:
Time: Enter time Processor: i386
Date: Enter date Coprocessor: not installed
Diskette A: 3.5 inch, 1.44 MB
Diskette B: not installed
=============================================
| Cyl | Hd | Pre | Lz | Sec | Size | |
| Fixed Disk C: Type 48 | ** | |||||
| Fixed Disk D: not installed |
** (Fill this out according to the label on the hard disk)
================================================
Base Memory: 640 KB
Extended Memory: 1024 KB
Display: EGA or VGA
Second Page:
| NumLock: | Off |
| CPU Speed: | Fast |
| RAM Wait States: | 0 |
| EMS Memory: | Disabled |
| EMS Memory size: | No EMS |
| EMS Base I/O Address: | 208h/209h |
| 640K-1024K Relocation: | Disabled |
| Shadow System BIOS: | Disabled |
| Shadow Video BIOS: | Disabled |
| Device Order: | A: , C: |
| Password: | Disabled |
Third Page:
| DMA Clk Source Select: | BUSCLK/2 |
| Bus Clk Source Select: | CINN1/6 |
| Refresh CMD width: | 280ns |
| CPU Clock Select: | CPUX1 |
| Parity Control: | Enabled |
| Dynamic Memory Sizing: | Enabled |
| DRAM configuration: | 2MB (2*1M) |
| Base RAM Above 256K: | Enabled |
| Extd. Memory Boundary: | No boundry |
Fourth Page:
Do not change
Press F10 to save ( To exit without save press ESC )
Check the CPU board by using the "Check It " program.