Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Author/Submitter: A. Posner (05/20/97)
Document Released: 05/20/97
Product Family: Imagesetters / Platesetters
New Upper door "lockers" are used from machine number 9720xxxx.
The new lockers will replace the two (2) 9/64-inch hex screws securing the Film
Guide Upper Door, located at both left and right sides of the Imagesetter
and will replace the upper door locking pin.
During installation the lockers do not need to be removed as was the case with the old screws. If the service door needs to be opened, the new lockers can be opened without a tool and then locked again.
Please note that both sides must be open in order to open the service door.