New Dynamic Cable

Author/Submitter: R. Elkayam (18/12/97)
Document Released: 18/12/97

Product Family: Imagesetters / Platesetters

• The Dynamic Cable for the Dolev 4press has been replaced with a more reliable one.
• In the New Dynamic Cable, the two cables that are connected to the two connectors of the spinner are threaded through the chain and continue all the way to the Ebox-J2.The cable, that is connected to the Ldt board still goes to the connector before reaching the Ebox.
• The Part number for the New cable is 504N1L394.

This is not an FCO
This means the cable should be replaced only if there is a problem.

• The old cable (504E38979A) can be used as long as it is in stock.
• New machines come with the new cable. If, the cable of a new machine needs to be replaced, it must be replaced with the new cable (504N1L394)