Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
These Release Notes contain the changes and additions that have been made since
the documentation of VER 9.057.
The main features of this Release Note are:
RECOMMENDATIONS & CHANGES FROM PREVIOUS VERSION
|
Feature
|
Status
|
| Restore Parameters from ACRI on boot sequence. | Works properly, correction for "Loosing Parameters" |
| Crash Detector Support | Works Properly (future conditional FCO - preventing major film crash). |
| Film is not cut (When having problems from loading cassette installed detector). | Works properly. The time for deleting all balances increased to 5 sec. |
| End of Film | Works properly |
| Strobe TTF error | Done |
| Secure Shut down | It is recommended to do a shut down every night , helps preventing "loos parameters" problem. |
| Old boards: HOMC CRI STROBE 5 | Works with old boards configuration. |
| Dynamic Optic 60K | Good for future 60K RPM |
Other Tests That were checked on that VER:
New Features:
Spinner Speed Limitations - Changing the machine dongle to 6pin
Use of the new spinner driver for 60K (CAT. 503C2L977S)