Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Dolev 4Press - Diagnostics

If the Imagesetter malfunctions during the check, run the Diagnostics package.
To set up the Diagnostics for your device:
  1. Select Utilities > Options.
  2. In the Options menu, select Diagnostics Setup and then press <Enter>.
  3. In the Setup panel, select the output device type for Diagnostics results. Select one of the options: PC, Laptop, PS/M or Brisque, and press <Enter>.
    Note: Diagnostics through the laptop or PC works only through the COM1 port. Diagnostics on the panel works only if the panel is connected to COM2. For PS/M or Brisque are connected through COM3/COM4.
To run the Diagnostics program:
Return to the Options menu once again, select Diagnostics and press <Enter>.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.