Dolev 800V - FCO 23473A- version 5.61 - Dolev 800 V
Description
version 5.61 - Dolev 800 V
Prepared By: S. Avisror
FCO Kit No.: 510F23473A
Comp. Level: N/A
Machine S/N:
Catalog No. 510V42451B
S/W Affected: N/A
Type of Change:Mandatory
Total Number of Pages:
Product Mgr: G. Menchik
Approval Date: 05/21/97
Product Support:
Approval Date:
Customer Support Mgr:
B. Peretz
Approval Date: 05/22/97
1. Reason For Change
New Features
Added option for carriage's service speed changing NVM(TB2)
-> Factory Tables -> Plotter Description
Added option for loading/saving NVM tables to floppy diskette
when botting from hard drive
Auto-adjustment image width coresponding to film thickness
Added parameter "Punch" (Yes/No) in "Expose
Params" window
Added parameter "Expose Clock" in "Expose
Params" window instead of "Data Frequency"
Changes in cassette auto-selection logic
PANEL: double click on ESC button resets panel and switches
plotter STANDBY.
Fixed Bugs - Previous Version
fixed bug: LD and LS values received from HOST was swapped
fixed bug: LD and LS from HOST format overrides Plotter's
LD/LS values
- Minimal value of carriage Service Speed changed to 2000
- removed msg "Illegal stop spiral"
improved some interface items in TB2 program
fixed bug in auto-detection of protocol#5 without ECHO by
first message
changed priority of "PC Abort Requested" message
from FATAL_QUEUE (all next exposures will be failed) to FATAL_PLOTTER (only
the exposure will be failed) and queue will not be stopped
fixed some bugs in remote editing of RES/INT dialogs
roller's problem finaly solved
OMC: fixed bug in laser calibration
OMC: fixed bug that enables to change VacuumSeq. parameters
fixed bug in punch info per cassette (will not depend to width
of film)
fixed bug in film width calculation formula, ( const offset
"-8" moved to Cas_Height_End_Margin in "Plotter Settings" )
removed parameter EncoderMarks(clocks) from Expose Area
calculation formula
fixed two bugs in PC: auto-update film length to 61 m
fixed bug in OMC: ROLLER task termination status and added new
information
message "Plot failed: roller"
fixed bugs in PANEL:
- Selection ONE/TWO Large Cassettes saves the selected mode
- Added option select Large Cassettes Mode shortly with panel F2 (RUN) key.
fixed bug in Panel's communication (caused panel stuck)
fixed bug "CRI End Plot err"
fixed bug "CRI idx frq warn"
fixed bug "Feeder pulses err"
fixed bug caused non-ASCII characters appearance on the panel
fixed bug caused roller stuck at the middle of the film
fixed bug caused "film stuck in conveyor err"
message
fixed bug caused "no ldt int chang err" message
2. Description of Change
The Dolev 800V s/w is updated to version 5.61 by booting from
the new diskette.
3. Change Procedure
3.1 Save all the Dolev 800 V tables on a backup diskette.
3.2 Insert the supplied diskette and reboot the machine. The
Dolev 800 V is updated with the new version that is loaded on the Dolev 800 V by booting
from the new diskette.
3.3 Save parameter again on the system diskette.
INSTALLATION For customers with Built - in Hard Drive
Executable files are stored in a compressed format to reduce loading time.
To install the software, run INSTALL from the DOS prompt or create a directory and
copy into the directory all files from A:\DOLEV directory. Uncompressed the files with
UNPACK command.
4. Test Procedure
4.1 After loading ver. 5.61, check that the Dolev 800 is in
standby mode.
4.2 Plot full size format to check that there is no image
corruption.
5. Parts List
510V42451B System Diskette for Version 5.61
6. Attached Documentation
None
7. Material Disposition
INSTALLATION For customers with Built - in Hard Drive
Executable files are stored in a compressed format to reduce loading time.
To install the software, run INSTALL from the DOS prompt or create a directory and
copy into the directory all files from A:\DOLEV directory. Uncompressed the files with
UNPACK command.
8. Logistics
Logistics - Material for this FCO will be supplied
immediately after
Field
Change Order