Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
22/12/92
O. WEISS
Reason for change
The 4A circuit breakers are not suitable to protect the Spinner motor & the power transformer against over heating.
Description of change
Switch off the Dolev 800.
Open the right side door and the standard controller cover.
Take out the Spinner driver board.
sing a soldering iron replace the circuit breakers 4A (174A00420) with new circuit breakers 2A (174A00210).
Reinstall the Spinner driver board on it's place.
Close the standard controller cover, the right door and restore power.