Field Change Order

1. Reason For Change

1. New Features:

• Changes in the cassette Autoselect Logic. When two large cassettes are installed and autoselect mode was selected the film will be loaded from the upper cassette when the lower one was finished.
• The cassette displaying is according to the correct film position.
• Actually spinner speed is displaying in the micro debug window.
• Punch yes/no parameter was added to the expose parameters window
• The max. film width is 34" ( 863 mm ).

2. Solved problems :

• Res/Int tables requests from the Host is supported.
• Wrong punch information for the loading cassettes was corrected.
• The selection between one or two large cassettes is shortly.
• Spinner control problem was solved. The spinner speed will be set correctly during the speed reducing too.
• The film width calculations that reduced 8 mm in the width was corrected.
• The EncoderMarks ( clocks) parameter was removed from calculation formula. This will make the offsets to be correct.

3. Add new diagnostics. Diagnostics 1.03B for Dolev 800V.

The Dolev 800V is updated with the new version that is loaded on the Dolev 800V by booting from the new diskette.

3. Change Procedure

1. Save all the Dolev 800V tables on a backup diskette.
2. Insert the supplied diskette and reboot the machine. The Dolev 800V is updated with the new version that is loaded on the Dolev 800V by booting from the new diskette.

4. Test Procedure

1. Check the Dolev 800V functionality
2. Check and adjust the Dolev 800V tables.

501V50603 - SYS DOLEV 800V x 1
501V50604 - DOLEV 800V - DIAG x 1

None

N/A

Material for this FCO will be supplied one week after order placement.