Dolev 800LF Upgrade to Dolev 800P

The Dolev 800 LF can be upgraded to Dolev 800P by using the upgrade kit catalog number 510K40673.

The upgrade procedure takes approximately 3 hours.

Upgrade Procedure:

1. Remove the insert from the large cassette. This will allow large film loading.
2. Add the small cassette to the loading system.
3. Install the supplied film guides. Regular film guide and left film guide.
4. Adjust the forces on the two film guides ( Cubic ) to be between 300 to 350 grams.
5. Connect the film in/out detector and the film encoder on the left cubic to the machine harness.
6. Change the machine description to Dolev 800C from Dolev 800LF.
7. Replace the machine name plate with the Dolev 800 name plate.
8. Run full format files and make sure that the Dolev can expose the full format. ( up to 812 mm ).

Document submitted 11 Dec 1997