Changing the Dolev 800P expose width from 812 mm to 838 mm

The Dolev^® 800P can expose up to 838 mm in the height direction, when using 34" film.

To change the expose width from 812 mm to 838 mm:

1. Enter "Plotter Setting" Remote mode ( Make sure that the system diskette is write-enabled ).
   
2. In the service tables, select Plotter Setting.
   
3. Change the Film End parameter from 914 to 902.  This adds 12 mm to the expose height.
   
4. On the Brisque workstation, select Reconfigure to update the expose dimension.

March 24, 1997