Dolev 800 Field Service Diagnostics -
Running Diagnostics via the Operation Panel

The Dolev 800 diagnostics version 1.06 enables you to run the diagnostics via the operational panel. This diagnostics does not contain the Utilities functions.

Procedure for running the diagnostics:

1. Place the diagnostics diskette in drive A: of your Notebook or any other computer with only one drive.
   
   
2. Type setup and then <CR>.
   
   
3. You will receive the following menu.
   
   "Choose configuration option:
   M-Monitor PC H-Host P-Panel W-Windows"
   you have to choose "P-Panel" and press <CR>
   
   Note: Once you set the diskette to one option , it will stay with this configuration unless you repeat the procedure described in steps 1 - 3.
   
   
4. Place the diag. diskette in the Dolev 800 floppy disk drive. Start up the machine (or press the reset button) and wait for the diag. menu to appear on the LCD of the operational panel.

Note: You cannot run the Utility functions from the operational panel.