Changing Vacuum Sequence Tables Using Notebook or PC

A. Posner
January 10, 1996

1. Save the NVM parameters on the system diskette.
   
2. Take the diskette from the Dolev 800 and insert it to any PC
   
3. Run TB R ( It is TB , space and r )
   
4. It will read the tables from the diskette. 5. Change the vacuum sequence
   
5. Go back to the Dolev 800.
   
6. Restore the tables from the diskette to the CRI.

A similar procedure can be adapted to changing other NVM tables.