Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
A. Posner
June 3, 1996
The error message " Film Stuck in Conveyor " sometimes will appear when the "Bridge" will not pull the film from the internal conveyor even after the detector on the bridge was activated.
The reason for this problem can be that the film will stuck on the rubber belts on the internal conveyor .
Solution for this problem can be putting some Talcum Powder ( Baby Powder ) on the belts of the internal conveyor.