Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Lately we get "bad boards" back from the field and from the production line with different error remarks.
After checking the boards it was found that the problem is with the connector between the board to the daughter board.
After pressing the daughter board's connector the TSP assy found to be working fine.
It is recommended to check this connector and to make sure that it is well connected in any case of problem with the TSP board before replacing it.