Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS


Useful Hardware "bits and pieces" for Creo Output Devices

Name Description Part Number Where used
Acetone, low grade (hardware store variety) Use for cleaning tape adhesive from table (for optics use 89-0087) 89-0017
Acetone, high grade Used for optics.  Available from chemical suppliers. 98-0087
Adaptor, air,5/16"socket,1/4"tube,quick 55-0336
Bushing: snap-in Nylon bushings 54-3119 PS3244 conveyor
Bushing: 1/4" snap in 54-3159 Also used in the conveyor on smaller shafts
Clamp: Cable tie Clamp screws in, attach cable ties 18-3054
Clamp: wire For round wires up to 1/4" 52-4181
Clip: 'C' clip Those little clips that fly across the room and disappear. 52-4272
Clip: No-groove circlip, 1/2" "Outside" type clip 52-4279 PS 3244 y-axis and zbrake
Compressed air, Ultrajet 2000 For dusting the encoder disk 89-0089  
Corner lamps 36-3134 VLF Platesetter lamps
Elbow: small plastic 55-0182 VLF wiper finger cylinder
Encoder cleaning kit All cleaning materials to clean an encoder disk. 04-0012A  
Fuse: 0.5A AGC 13-3212
Fuse: 2A 3AG slo blo 13-3236
Fuse: 5A 3AG slo blo 13-3355
Fuse: 0.5A slo blo 13-3459
Fuse: 0.375A fast blo 13-3575
Gloves: vinyl, large Protects hands from grease 89-0023  
Grease: Shell Alvania mineral General purpose.  Not for the carriage tracks or leadscrew. 89-0001  
Isopropyl alcohol, HPLC High grade, >99% 89-0088  
Loctite 222 Mild strength.  OK for screws M3 and below. 89-0054  
Loctite 242 Medium strength.  Do not use on screws M3 and below. 89-0053  
Loctite 545 sealer Seals threads on pneumatics.  Not for quick-disconnects 89-0046  
Loctite 609 (pulleys, bearings) permanent 89-0044  
Loctite primer N Used to clean screws before applying Loctite 89-0041  
Plug: 5/32", quick disconnect Plug to block small air fitting 55-0162
Plug:  5/16", quick disconnect Plug for large air fitting 55-0167
Plug: 1/4", quick disconnect Plug for medium air fitting 55-0270
Pulley, 20 teeth Be careful - the pulley can break 57-2835A PS 3244 conveyor roller
Reed switch 15-3063 door switch, sensors, etc.
Reed switch testing cable 10-3622B
Screw: M3 * 8 flathead Attaches cable bracket to green/HRX head 52-4205 Green/HRX head
Screw: M3* 8, socket-cap, S-plated, pre-applied Thread locker material pre-applied 52- 3252
Screw: M4 * 6 buttonhead 52-4172
Screw: M4* 8, socket-cap, S-plated, pre-applied 52- 3253
Screw:, M5* 10,socket-cap, S-plated 52- 4483
Screw: M6 * 16 flathead Bolts treadplate to frame 52-3078 PS3244
Screw: M6 * 12 buttonhead 52-4291
Terminal: Push on Electrical wiring 16-3056
Terminal: Ring Electrical wiring 16-3054
Tube: FTG,AIR,MALE,10-32UNF,5/32"TUBE,INT HEX They break easily! 55-0070 PS 3244 and TS 3244
Tube: SPEED CTRL,AIR,OUT,ELB,10-32NF,5/32"TUBE Screws into small cylinders. Can easily break. 55-0177
Washer: Belville
Washer: wave Formerly used on TEC lock/unlock cyl.
Washer:  M4 ,Belville, HDS, S-plated 52-4261
Washer: , M5,BEL-SERRATED,S -BLK 52- 4202
Wipes: Kimwipes (small)   89-0029  
Wipes: Kimwipes (large)   89-0030  
Wipes: Luminex Microfiber cleaning cloth 89-0168 Encoder disks

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.