Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Lotem 400

FCO 510F26114

Yaron Soffer
7-Nov-99

Field Change Order

Description
Adding three Ferrite to the Lotem Harness for the CE mark

 

Prepared By: Yaron Soffer FCO Kit No.: 510f26114
Comp. Level: N/A Machine S/N: All Beta machines
Catalog No. S/W Affected: N/A
Type of Change:  Mandatory Total Number of Pages:3
Product Mgr: Y. Solomon Approval Date:
Product Support: Y. Soffer Approval Date:
Customer Support Mgr: K. Paperny Approval Date:
 

Abstract:

This FCO is to update all the beta machine to the CE mark
The kit should includes the following:

Cat Number Quantity

Part name
147A00710 2 ROUND CABLE FERRITE
147A00730 1 ROUND CABLE FERRITE
    CE Label
374A2R605 1 High Leakage Current Label
203A10030 8 MINI CABLE TIE 140MM
STE can order 15 kits
STA can order 10 kits
STN can order 5 kits
STMA can order 5 kits
STAP can order 5 kits

Tools
No special tools are needed

1.   Paste on the CE Label (see [1] at the picture bellow) at the Distribution Box.
Verify or copy the correct Serial Number on the CE Label - see [3] at the picture bellow.
2.   Paste on the High Leakage Current label (see [2] at the picture bellow) at the Distribution Box.
3.   Open Front door.
4.  Disassemble the Front cover (bellow the Loading Tray).
5.  At the Laser-Box:
Add two Ferrite Cat. No. 147A00710 to the VLSI cable and Laser Cable - see item 1 in figure bellow.
6.  Add one Cat. No. 147A00730 to the Molex cable - see item 2 in figure bellow.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.