Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Field Change Order #512-00097A

Applies to

   Version 1.60.09 for:
  • Lotem® 400
  • Lotem 400 Xpose
 Priority = Next failure
Release date = 31 Dec 2003

Problem

  
  • Application crashes when one of the following detectors is closed:
    • Unload conveyor
    • Out of machine
    • Out of drum
  • Cannot load Lotem 400 Xpose version
  • MCU with Lotem 400 Xpose not supported
  • UDRC not supported
  • Omron interlocks not supported
  • Registration problems

Solution

  

Implement FCO 512-00097A.
See Version 1.60.09 release notes for Lotem 400

Time needed to implement

   1 hour

Prerequisite FCOs

  
  • Lotem 400—software version 1.30.04
  • Lotem Xpose—software version 1.00.135
  • Lotem 400 small—software version 1.50.07
  • Lotem 400 with MCU—FCO 28818: Short Pin Assembly
  • Chemistry-free devices—Brisque software version 4.0

Parts needed

  
Part name Quantity Part number
S/W Kit Application 1.60.09
1
 634-00070A
FCO Document
1
 719-00172A

Procedure

  

Insert the version 1.60.09 CD in the CD drive. The version self-installs.

Logistics

   Approved quantities:
CSC
Quantity
Lotem 400 Lotem 400 Xpose
CAM: 30 20
CEU: 40 30
CAP: 10 5
CJP: 5 2
CMA: 10 10
Other:    
No Limit:    

Document number
   719-00172A-a
Technical contact(s)
   Mario Amir
Date submitted
   31 Dec 2003

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.