Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
In one of the FCOs for the Automatic Loader you will need to replace the air supply manifold (from 4 to 5 solenoids). The old manifold is located behind the Local 3 board. In most of the machines it is possible to locate the new manifold (5 solenoids) near the Vacuum Generator and not behind the Local 3 board. Please check that the air pipes and wirings are long enough. Please send back the old manifold together with all unused parts.
Together with the FCO parts there are some air pipe connectors to enable relocated of the FUFU oil filter to the main inlet of the automatic loader. This option is valid only if you do not use the FUFU at all.