Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
It seams that when upgrading the Lotem 400 (Manual or auto loader with 2 x
Local 2) to the 1.30.04 you can get errors from left/right locals. The
errors are put & get or checksum incorrect.
If going back to the old version (1.10.05 or 1.20.14 or 1.20.15) there are no
errors from the Local 2.
To fix that you should use the NUC C.L. - N or higher.
This information isn't certain, when it will be I will add to the FCO that
it is a mandatory to replace the NUC.