We have a Bios diskette for the Lotem 400. If you need to change/update the
Bios than do the following:
Switch on the Lotem and press on the DELETE key until getting to the SETUP
screen.
Under the SETUP window use the arrow to select the UTILITIES and press <Enter>.
Use the arrows to move to Secure CMOS and change to Disable (by using the
<Enter> and arrows)
Press ESCAPE twice and select "Save changes and Exit".
Insert the Diskette to Drive a: and restart the PC.
The Bios will load automatically to the CPU. When finished remove the diskette
from Drive a: and restart the PC (by using ALT+CTR+DEL).
During the start up you will need to go to the Setup again (by choosing
"F1"). Select the UTILITIES and Secure CMOS (like the first time)
and change the setting to ACTIVATED.
Press ESCAPE twice and select Save changes and Exit. The Windows 95 will
restart.
