Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
We had some cases where it was though to adjust the Y parameter just before the plate go in the paunches especially when using two thickness, 0.15mm and 0.3 mm plates. The solution is a guide that is placed on the lower lips of the paunch that guides the 0.15 mm plate inside the paunch. The first guide that we is assembled with two screws (only for new paunches), catalog number - 290A2T777or 290A2T778 (normal or double paunch). For old type of paunches (where there are no threads for the two screws) you can use a new guide, catalog number - 290B6A723 or 290B6A724 (normal or double paunch).