Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
The new software version 1.10.05 (similar
to the Loem 800 version 2.2) is released.
This s/w requires the DDB-1-N.
Please refer to the Release
Note for Version 1.10.05 (pdf format)
No need to load the update for Edge Detection (already inside).
No need for special loading of the VLSI/TSP, (the s/w loads it during install).
Please pay attention for the Brisque procedure for updating the name of
the machine (from Lotem to Lotem400).