Lotem 400 - Ver 1.30.04 Patch #3

william Shany
03-Mar-02

Description

This patch includes a Loading system scripts files.

• CUnloadFromDrumToTray.Script ver. 1.00.02
• CUnloadFromTray.Script ver. 1.00.02.

Each scipts version can be found on the header of the file, using standard notepad.
This patch solves the unload problem.
Patch #3 is not includes patch #1 or #2 for Ver 1.30.04.:

• Patch #2 - Basic patch for 1.30.02 -solve veriaty of problem.
• Patch #3 - solve unload problem.

Note: This patch is only for ver 1.30.04

Installation Procedure

1. Insert a blank diskette into your computer's floppy drive, and save the attached file named "1.30.04-patch for unload.exe".
2. Using the GUI, open the front and right side doors.
3. Insert the diskette with the saved file into the machine floppy drive.
4. Using the explorer, go to drive A and double click on the file.
5. Run the Install batch file. A Dos window will show up on screen.
6. After loading the scripts file a "Verify ….", press any key when finished.
7. Remove the floppy diskette from drive A and close all the doors.
8. Start up the application, and make sure the machine is in ready mode.

Note: The patch will change the Lotem400V\VERSION\Service Pack to 3.

Test procedure

1. Load/Unload plate.
2. Expose two plate and make sure the expose ends with no error messages.