Lotem 400 - Drum cannot rotate

Error "Drum Cannot Rotate" appears on Lotem 400


Product		Lotem™ 400 platesetter Lotem™ 400 Xpose platesetter Brisque™

Component		Head grippers (part number 500-00335/A)

Error		`Drum cannot rotate`

Symptoms		When you send a job from Brisque to the Lotem 400 platesetter, the plate feeds in the head grippers, and then stops. The operation times out and the error message `Drum cannot rotate` appears. You can complete the operation manually in an open device.

Cause		Drum to Plate After Extra parameter.

Solution		Reduce the value of the Drum to Plate After Extra parameter: Select Loading System > Load Plate > Load Plate Extra to Drum for 0.15 (or 0.2/0.3/small), and reduce the value. The default values for the Drum to Plate After Extra parameters are as follows: Drum to Plate after extra for 0.15 ( 0 ) Drum to Plate after extra for 0.2 ( 2 ) Drum to Plate after extra for 0.3 ( 3 ) Drum to Plate after extra for Small ( 0 )

Technical contact(s)		Mario Amir
Submitted by		Mario Amir
Date submitted		26 Aug 2003