Product

• Lotem^® 400 platesetter
• Lotem 400 Xpose

Operating system

Error

Symptoms

Solution

This is a customer-oriented procedure. If this procedure does not solve the problem, the customer is instructed to contact the service representative.

1. Continue to follow the various prompts in the startup sequence.
2. When the Windows startup is complete, shut down Windows and restart the workstation. Try to start Windows.
3. If the startup fails and the workstation becomes unavailable during startup, restart the workstation, and during initial startup, press F1 and then select Safe Boot. Windows will start without drivers.
4. Select AccessoriesDisk > Tool > Scan Disk to run a system test, and then try to start Windows.
5. If Scan Disk did not resolve the problem, reinstall the following software in the order listed:
1. Windows image CD Rom
2. Lotem Controller CD Rom
3. For Lotem Xpose only: Lotem 400 Xpose CD Rom
6. Try to start Windows.

Technical contact(s)

Mario Amir

Submitted by

Mario Amir

Date submitted

31 Aug 2003