Field Change Order #24804 - Metal Nipples for Cassette Air Pressure

1. Reason For Change - Original nipple made from plastic and later discovered that it had a tendency to break.
   
2. Description of Change - Replace plastic nipples with metal nipples.
   The angled plastic nipples that need to be replace is behind the rollers assembly in the location by the arrow (can't be seen in the photo)
   
3. Change Procedure -
   1. In order to access the angled nipple on the back of the injector, you need to access the back of the roller assembly in order to disconnect the injector from the nipple.
   2. Replace the plastic nipple with the metal nipple.
   3. Tighten the injector to the nipple.
      
4. Test Procedure - Insert the loading cassette and check that the
   air is activated correctly during plate loading.
   
5. Parts List -
   290A5L671 x 2
   344C70010 x 2
   
6. Attached Documentation - None
   
7. Material Disposition - None
   
8. Logistics -
   STA can order up to 11 kits
   STE can order up to 11 kits
   STAP can order up to 3 Kits
   STN can order up to 1 Kit
   STME can order up to 1 Kit