Field Change Order #24806 - Fly Off Sensor

1. 1. Reason for Change
   Fly off detector has more reliable spring activated detector installed.
   
2. Description of Change
   Replace existing fly off detectors unit including Brackets with the new ones.
   
   
3. Change Procedure -
   1. Disconnect Molex connectors from fly off detectors.
   2. Unscrew and remove two detector units and brackets.
   3. Replace new brackets and detectors (ensure that detectors face drum).
   4. Replace the old screws with the new ones.
   5. Place on drop of Blue locktite before tighten the screws.
   6. Connect Molex connectors to the fly off adapter.
      
4. Test Procedure -
   1. Perform automatic plate loading.
   2. Release plate from tail grippers.
   3. Open fly off window to see change in status of fly off detectors.
   4. Rotate drum at 10rpm and verify that fly off sensor is activated.
      
5. Parts List -
   Fly Off sensor - 504S4L048 x 2
   Bracket - 291A7L836 x 2
   Fly Off Adapter - 504N4L045 x 2
   Screws - 380A00060 x 4
   Spring whashers - 382D01000 x 4
   
6. Attached Documentation
   None
   
7. Material Disposition
   None
   
8. Logistics
   STA need to order 9 Kits
   STE need to order 9 Kits
   STAP need to order 2 Kits
   STN need to order 1 Kits
   STMA need to order 1 Kits