Field Change Order #27494 - Thin Plate Supports

Description To Improve the reliability of machines that work with 0.15 plates.

1. Reason For Change
   The plates in the 0.15 Plate Kit deflects down the middle. The punch systems configurations have spaces in between the punches. There is not enough space for regular wide plate support. The thin plate support solves this problem.
   
   
2. Description of Change.
   Install the new thin plate supports (see picture no. 1).
   




3. Change Procedure
   
   1. Remove the loading cassette.
   2. Use the GUI to open the front door.
   3. Install the new plate supports (507B3E605). The distance between them should be as wide as possible, according to the minimum plate size and punch system configuration.
   
   
4. Test Procedure
   
   1. Place cheaters on the open doors.
   2. Load 0.15 plates from different sizes. Make sure they load properly.
   3. Remove the cheaters.
   4. Close all the doors
   
   Go back to working status
   
   
5. Parts List
   
   

PART	QTY	DESCRIPTION
374A00080	1	PACKING LABEL-WHT
507B3E605	2	THIN PLATE SUPPORT ASSY
7!FCO-DOC	1	FCO DOCUMENT




6. Attached Documentation
   None
   
   
7. Material Disposition
   You can use the old parts on different punch configurations.
   
   
8. Logistics
   Approved quantities:

Schedule supplies for first lots