Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Description Enable COM 6 To support MCU
|
Prepared By: Mario Amir |
FCO Kit No: 503C2L182P |
|
Comp. Level: P |
Machine S/N: N/A |
|
Catalog No: 503C2L182P |
S/W Affected: N/A |
|
Type of Change: Conditional |
Total Number of Pages: 1 |
|
Product Mgr: Gabi Eitan |
Approval Date: 19-Dec-01 |
|
Product Support: Mario Amir |
Approval Date: |
|
Customer Support Mgr: Assaf Zach |
Approval Date: |
1. Reason For Change
Update all boards with boards that were tested with MCU (com 6) to support Lotem with local 3.
2. Description of Change
Change NUC Board from 503C2L182S to 503C2L182P
3. Change Procedure
Replace the Old NUC on stock with the new NUC Com level P
4. Test Procedure
Check that the MCU local 3 board is loaded successfully and the machine will
be on ready mode.
5. Parts List
| PART | QTY | DESCRIPTION |
| 503C2L182P | 1 | |
| 719-28284 REV. A | 1 | FCO DOCUMENT |
7. Material Disposition
Return all the existing NUC on your Stock To SCIL and place new orders for NUC Com level P.
Update the new catalogue number on your lists.