Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

L-Box  PM

Prepared By: Samuel Gilad
Date: 8 Apr 02

An excellent tip about the L- box PM.
After performing the L-Box PM (on a 48 beam machine at Print Atlantic), the last 12 beams (36-47) failed.
This happened to us, and shows we need to be careful when putting back the motherboard:
We discovered that the two lower pins on the edge connector (between the motherboard & daughter board) had been bent during re assembling. Straightening the pins fixed the problem.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.