Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS

Adjusting the Paper Disposal Detector

  1. Make sure that the screw trend all the way to the Left.
  2. Turn the Sens screw ( against the clock )till the red & green Lads will turn on.
  3. Rotate the screw clock ways till the lads till turn off.
  4. Continue to rotate the screw till the green led will turn on.
  5. The working point is where the red led turn off and the green led turn on.
Testing:
  1. Make sure that the green led turn on when the first paper enter to the bin.
  2. Take half of the papers out and check that the green led is still on.
  3. Take all the papers out and make sure that the green led is off.
Note:

On the GUI paper disposal Detector dialog the statues will be ON when there is no paper at the bin.
And the statues will be OFF when the first paper will be enter to the bin and on.

    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.