| From Cassette to Punch Entry: A1-A5 |
| Motion |
Parameter |
Value |
Note |
| A1 |
Loading System>Loading System Setup>X
Position In Cassette (mm) |
350 |
|
| A2 |
Loading System>Loading System Setup>Prepare
Y to catch Plate (mm) |
70 |
|
| A3
SCU |
Loading System>Loading System>X Prepare
to Catch Plate (mm) |
365 |
Changes made to this value may cause the plate
separation process to malfunction. |
| A3 DLC Upper |
Loading System>Loading System>X Prepare
to Catch Plate (In Dual Cassette ) For Upper Tray (mm) |
367 |
|
| A3 DLC Main |
Loading System>Loading System>X Prepare
to Catch Plate (In Dual Cassette ) For Main Tray (mm) |
370 |
|
| A4 |
Loading System Setup>Loading System>Y
Go to detector |
|
|
| A5 |
Loading System Setup>Loading System>Tilted
Paper Metal Detector Y relative position (mm) |
-5 |
This parameter relates to the way the disposal
sequence affects the paper in the cassette. |
| From Cassette to Punch Entry: A6-A11 |
| Motion |
Parameter |
Value |
Note |
A6
(0.3 / 0.2) |
Loading System Setup>Loading System>Y
Extra to detector (mm) |
14 |
|
| A6 |
Loading System Setup>Loading System>Y
Extra to detector For 015 (mm) |
7 |
|
| A7 |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>X Plate Rel Backward In Cassette (mm) |
2 |
|
| A8 |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>X Plate Rel Backward In Cassette (mm)>Y
Plate High Up In Cassette (Rel) (mm) +Y Plate Rel Up In Cassette (mm) |
-61 |
|
A9
(0.15) |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>X Backward Rel For 0.15 palte (mm) |
16 |
|
A9
(0.2) |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>X Backward Rel For 0.2 palte (mm) |
19 |
|
A9
(0.3) |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>X Backward Rel For 0.3 palte (mm) |
27 |
|
A9
(0.4) |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>X Backward Rel For 0.4 palte (mm) |
22.3 |
|
| A10 |
Loading System>Loading System>X Prepare
to Catch Plate (mm)+X Plate Rel Backward In Cassette (mm) |
365+2 |
Different value for SCU & DLC (main, upper). |
| A11 |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>Y After Plate Seperation (mm) |
7 |
|
| From Cassette to Punch Entry: A13-A18 |
| Motion |
Parameter |
Value |
Note |
| A13 |
Loading System>Loading System Setup>Prepare
Y to catch Plate (mm) |
70 |
This parameter effects the plate's exit movement
from the cassette. It is not recommended to amend the default value (70). |
| A14 |
Loading System>Loading System Setup>x
In Punch (mm) |
128 |
|
| A15 |
Loading System>Loading System Setup>y
In Punch (mm) |
75 |
|
| A16 |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>Y Up After Punch (mm)+Y Up For Centring
(mm) |
(-15)+
(-15)=
-30 |
|
| A17 |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>X In After Punch (mm) |
282 |
The X position must be above the disposal roller
otherwise the plate will bend. |
| A18 |
Loading System>Loading System Setup>y
In Punch (mm) - Load Plate>From Cassette To Punch Entry Stage>Y Up
After Punch (mm)+Y Up For Centring (mm) |
45 |
The Y position remains at the same height:
(75-15-15=45) |
| From Cassette to Punch Entry: A19-A24 |
| Motion |
Parameter |
Value |
Note |
| A19 |
Loading System>Loading System Setup>Y
Go to detector |
|
|
| A20 |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>Y Down After Punch (mm) |
13 |
|
A20
(0.2) |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>Y Down After Punch For 0.2 (mm) |
10 |
|
A20
(0.15) |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>Y Down After Punch For 0.15 (mm) |
7 |
|
| A21 |
Loading System>Loading System Setup>y
Enter To Punch (mm) |
74 |
Ensure that the plate enters the punch slot
in a smooth motion. |
| A22 |
Loading System>Loading System>Load Plate>From
Punch Entry To Drum Entry Stage>X After Cantring (mm)+ >Loading System>Load
Plate>From Cassette To Punch Entry Stage>X Extra To Short Pins (mm) |
270-30 =240 |
|
A22
(0.2 / 0.15) |
Loading System>Loading System>Load Plate>From
Punch Entry To Drum Entry Stage>X After Cantring (mm)+ >Loading System>Load
Plate>From Cassette To Punch Entry Stage>X Extra To Short Pins (mm) |
265-30
=235 |
|
A23
|
Loading System>Loading System Setup>x
Rep Extra In Punch (mm) |
-4 |
Only relevant if short to pins is required.
|
| A23 |
Loading System>Loading System Setup>x
Rep Extra In Punch For 02 (mm) |
-3 |
Only relevant if Extra is required. |
| A24 |
Loading System>Loading System Setup>y
In Punch (mm) |
75 |
|
| From Punch to Drum: B1-B5 |
| Motion |
Parameter |
Value |
Note |
| B1 |
Loading System>Loading System Setup>Load
Plate>From Punch Entry To Drum Entry Stage>Y Up For ReCatch (mm) |
-15 |
|
| B2 |
Loading System>Loading System>Load Plate>From
Punch Entry To Drum Entry Stage>X After Cantring (mm)+ X Rel After Sec
Cantring |
270+5
=275 |
The X position must be above the disposal roller
otherwise the plate will bend. |
| B3
(A19) |
Loading System>Loading System Setup>Y
go to detector |
|
|
| B4
(A20) |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>Y Down After Punch (mm) |
13 |
|
B4
(0.2) |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>Y Down After Punch For 0.2 (mm) |
10 |
|
B4
(0.15) |
Loading System>Loading System>Load Plate>From
Cassette To Punch Entry Stage>Y Down After Punch For 0.15 (mm) |
7 |
|
| B5 |
Loading System>Loading System>Load Plate>From
Punch Entry To Drum Entry Stage>Y Up After Cantring |
74 |
|
| From Punch to Drum: B6-B9 |
| Motion |
Parameter |
Value |
Note |
| B6 |
Loading System>Loading System>Loading
System Setup>x Rep Extra In Punch (mm) |
-4 |
|
| B7 |
Loading System>Loading System>Loading
System Setup>X Prepare To Drum (mm) |
330 |
Make sure that the X position is out of the
wheel bracket zone. |
| B8 |
Loading System>Loading System>Load Plate>From
Punch Entry To Drum Entry Stage>Y To Drum (mm) |
17 |
|
| B9 |
Loading System>Loading System>Load Plate>From
Drum Entry To Drum Entry Stage>X Near To Drum (mm) |
140 |
|
| 0.2 mm plates |
B6
(0.2) |
Loading System>Loading System>Loading
System Setup>x Rep Extra In Punch for 0.2 (mm) |
-3 |
|
B7
(0.2) |
Loading System>Loading System>Loading
System Setup>X Prepare To Drum (mm) |
330 |
|
B8
(0.2) |
Loading System>Loading System>Y Max Up
(mm) |
0 |
|
B9
(0.2) |
Loading System>Loading System>Load Plate>From
Drum Entry To Drum Entry Stage>X Near To Drum (mm) |
140 |
|
B10
(0.2) |
Loading System>Loading System>Load Plate>From
Punch Entry To Drum Entry Stage>Y To Drum (mm) |
17 |
|
| 0.15 mm
plates |
B6
(0.15) |
Loading System>Loading System>Loading
System Setup>x Rep Extra In Punch for 0.2 (mm) |
-3 |
|
B7
(0.15) |
Loading System>Loading System>Load Plate>From
Punch Entry To Drum Entry Stage>X On Wheel (mm) |
307 |
|
B8
(0.15) |
Loading System>Loading System>Load Plate>From
Punch Entry To Drum Entry Stage>Y Up Half Way (mm) |
40 |
|
B9
(0.15) |
Loading System>Loading System>Load Plate>From
Punch Entry To Drum Entry Stage>Y To Drum For 0.15 (mm) |
16 |
|
B10
(0.15) |
Loading System>Loading System>Load Plate>From
Drum Entry To Drum Entry Stage>X Near To Drum (mm) |
140 |
|
| From Drum Entry to Drum: C1-C6 |
| Motion |
Parameter |
Value |
Note |
| C1 |
Loading System>Loading System Setup>X
In Drum (mm) |
18 |
|
C1
(0.2 / 0.15) |
Loading System>Loading System Setup>X
In Drum For 0.2(mm) |
16 |
|
| C2 |
Loading System>Loading System>Load Plate>From
Drum Entry to Drum Stage>Y Before Extra to Drum (mm) |
-4 |
|
| C3 |
Loading System>Loading System Setup>X
In Drum Final (mm) |
-10 |
|
C3
(0.2 / 0.15) |
Loading System>Loading System Setup>X
In Drum Final For 0.2 Plates(mm) |
-8 |
This parameter is the same as for those plates
that have a max. size of 700 mm. |
| C4 |
Loading System>Loading System>Load Plate>From
Drum Entry to Drum Stage>Y After Extra to Drum (mm) |
-2 |
|
| C5 |
Loading System>Loading System>Y Max Up
(mm) |
|
|
| C6 |
Loading System>Loading System>Load Plate>From
Drum Entry to Drum Stage>X After Gripper (mm) |
352 |
|
| Paper Disposal Task: D6-D13 |
| Motion |
Parameter |
Value |
Note |
| D6 |
Loading System>Loading System>Load Plate>Paper
Disposal Stage>Y Up After Paper Down In Cassette (mm) |
-5 |
|
| D7 |
Loading System>Loading System Setup>Paper
Y Down In Cassette (mm) - Paper Disposal Stage>Y Up After Paper Down
In Cassette (mm) |
6-5
=1 |
|
| D8 |
Loading System>Loading System>Load Plate>Paper
Disposal Stage>Y High Up (mm)
|
40 |
|
| D9 |
Loading System>Loading System Setup>X
Paper In Motor (mm) |
210.8 |
|
| D10 |
Loading System>Loading System Setup>
Y Paper Out Cassette (mm) |
98.5 |
|
| D11 |
Loading System>Loading System Setup>Y
Max Up (mm) |
0 |
|
| D12 |
Loading System>Loading System Setup>
Y Paper Out Cassette (mm) |
98.5 |
|
| D13 |
Loading System>Loading System Setup>Y
Max Up (mm) |
|
|
| A1-A5 |
See From Cassette to Punch
Entry (A1-A5) |
|
|
