Known Diagnostic Failures in Version 3.20.01

Itai Peperovich
11-Jun-01

Description

The most recent feedback from the production line coneys that when running diagnostic on the LOTEM 800, with the configuration listed below; the diagnostic is failing on the test mentioned below. These failures do not indicate that something in the machine is malfunctioning. If you will encounter the same failures, try to work with the machine before you start fixing the machine.

1. Local2 Machine with New Loading System:

• Constant failure in X & Y motors in Smoothness and Accuracy tests.
  
• Unstable Side2side tests.
  
• MCF REV C - failing on +5 Volts test.