Balance System Error Message

Ido Shatzky
May 20, 1999

Problem:

The arm that moves the weight balance open is in a wrong position.

Solution:

The drums high speed is for movements without plates during the loading and unloading sequences.

There are two places to change the high speed movement:

1. You need to change the "balance system/drum high speed" from 200 to 86.
2. If you have problem with the unload small plate (28") (the upper roller goes down after the drum has moved and the plate stack in the machine), you can change the "loading system/drum/drum high speed" form 200 to 100.