Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Description
CSMA reported a problem at 4 different sites. The problem was intermittent and
appeared as a whole image shift (1- 5 mm in screw axis). On press, it appeared
as misregisteration in one or two separations.
Investigating the configuration and last modification of each site, it was found
found that they were all still using Brisque Upd 1.27 which is about 1 year
old. It is probably the cause for the problem (according to CSE reports and
Brisque focal points).
Please verify that you use latest Brisque Upd 1.35. - Consult your Brisque specialists
for further information.