Product

Lotem^® 800

Error

Protector XY punch is locked by X motor

Symptoms

The error message is associated with the following symptoms:

• XY bar does not move
• Bar flag is stuck in the up position

Cause

The wires inside the XY bar may be preventing the bar flag from returning to its down position. If the flag is stuck in the up position, the system interprets this to signify that the XY bar is lowered and hence an error message is generated.

Solution

In Lotem Controller, check the status of the bar flag.

If the bar flag is ON, do the following:

1. Remove the XY bar cover.
2. Check why the bar flag cannot return to its down position.
   If required, rearrange the wires inside the XY bar, so that they are not obstructing the bar flag:
   
   
   
   
3. Ensure that the bar flag can move freely.
4. Replace the XY bar cover.

Technical contact(s)

Itai Peperovich

Submitted by

Itai Peperovich

Date submitted

01 Oct 2003