Choose a Problem Back to Index Unload Motor didn’t Reach Position. Unloading Plate Halts at the Unloading Tray. Plate didn’t Leave the Drum. Fly Off Error. Plate is Stuck in Unload Rollers. Plate was Ejected to Conveyor at High Speed. Plate Stuck at the Processor Entry. Expose Ends, But Plate is not Unloaded. Drum Gives Error `Drum Go Speed Time Out. Plate is Loaded on Drum Correctly, But Unloading Fails. Paper Rollers don't Work , But X, Y does. Plate is Stuck on Conveyor at Processor Entrance, and the Lotem Continues to Expose and Unload. Plate is not Coming Out of the Head Gripper During Unload. drum doesn't stop in the head gripper under the Enable gripper detector, it move an inch