Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
| Command | Result |
C:\Th2\Tools\ |
To save the NVS parameters from the
MCE to the diskette. Note: The file must be saved in the same folder as the bload program. |
| C:\Th2\Tools\ bload f=File name_flash.bin p=X b=57600 d=flash I=nvs upload |
To save the Flash from the MCE to the
disk ette. Note: The file must be saved in the same folder as the bload program. |
| C:\Th2\Tools\ bload f=Qantum_ram.bin p=X b=57600 d=ram I=nvs |
To Restore the NVS parameters to the
MCE. Note: The file must have been created using the version of firmware that is being loaded. |
| C:\Th2\Tools\ bload f=Qantum_flash.bin p=X b=57600 d=flash I=nvs |
To Restore the flash to the MCE. Note: The file must have been created using the version of firmware that is being loaded. |
Quantum>> nvs dump diff Note: This command is not valid for Firmware version 1.20.03 and later. For version 1.20.03 and later, use the PRM diff command. |
All NVS parameters which are not at their default value will be saved
to a text file. Type this command at the Splot and use your terminal to capture data from the screen. |
Note:
X represents the com port in use.
In case the loading / saving failed, delete the file that was already created
and re-save.
In case the loading / saving failed repeatedly, reduce the baud rate at the
procoom application.
Type Quantum>> MCE baud 9600
Change the procomm monitor baud rate to 9600.
At the end of the loading return the baud rate to 57600.
f represents the filename.