Splot plotting commands

Splot Plotting Commands

Command	Result
Plot	Display the current plot status.
Plot <test pattern #>	Plots the specified test pattern (media must already be loaded onto the drum).
Edge test	Performs the edge detect sequence and displays the edge position in microns.
PLL on	Enables the drum tracking Phase Locked Loop (PLL).
Plot GC [enable/disable]	Enables, disables, or displays status of geometric correction.
Plot ortho [enable/disable]	Enables, disables, or displays status of orthogonality correction.
Plot shift [<sscan_mm><mscan_mm>]	Sets or displays global plot shift in millimeters.
Plot list	Lists all available test plot patterns. Displays ortho status, enable/disable ortho correction.
Plot series [enable/disable]	Enables, disables, or displays status of plot series mode.
Plot stop	Shut down. Stop the exposure.
Plot help	Shows help commands related to plot.