Applies to

Priority = Next visit
Release date = 17 Nov 2002

Machines affected

Lotem 800 Quantum Spectrum with DLC

Component

Kit 512-00317

Problem

When reloading the proofing tray into the DLC, it scratches the upper tray.

Solution

Stick supplied tape on the front end of the proofing tray.

Time needed to implement

15 minutes

Parts needed

Procedure

1. Open the DLC upper tray cover and remove the proofing tray.

2. Stick the supplied tape on the front side of the proofing tray, as shown below.

3. Fold the remaining tape over the bottom of the tray.

4. Place the proofing tray back into the upper tray and close the cover.

Tests:

* Load receiver and donors to check that the parallelism is still the same. If not, fix it with the front screws.

Logistics

Approved quantities:

Schedule supplies for first lots: Immediately

Inventory: Order 1 kit for proofing tray.

Lead Time: 1 week

Technical contact

Nir Peleg

Product Support Manager: Yaron Soffer

Modified by

Nir Peleg

Date submitted

Doc. No. 719-00317