Product

• Lotem™ 800
• Lotem 800 Quantum
• Lotem Quantum Spectrum

Background

Procedure

1. Tape the supplied Teflon tape (P/N 404-00026) on the front, high end of the punch cover, as shown below.

2. Cut the tape to accommodate the size of the punch cover, as shown below.

3. Cut the excess tape from both sides, as shown below.

4. Expose the adjustment screw in the middle section of the punch cover by carefully cutting away the tape covering the screw, as shown below.

After completing the above procedure, the punch cover should appear as follows:

Technical contact(s)

Nir Peleg
See the Escalation page for escalation contacts.

Date submitted

19 Jan 2003