Upgrading the Brisque Version

Upgrading the Brisque version from EP1 (4.0.85+Upds) to EP2 (4.0.96+Upd13) requires re-calibrating the Lotem 800 Quantum for full exposable area.
Perform the calibration on the PC using Set gc. Change the sshift parameter by 3mm.

On the Brisque:
Press Format:
Head/Tail Margins = 6,6
Left/Right Margins = 0,0
Plate expose:
Offset = 0,0 (without slug/plate ID)