Warning: Live wire in D-box on Magnus 400

Recently, a Kodak^®Magnus^™ 400 platesetter was delivered to a customer site with a loose 240-V live wire in the D-box.

A 240-V wire is active only in cases where the voltage selector key on the D-box is set to 240. On the assembly line, the D-box is tested only at 220 V. This is the reason that the live wire was not detected.

To provide optimum safety to service engineers, service technicians, and other qualified individuals, the following measures have been taken:

• On the assembly line, the D-box will be tested with all voltage keys (210 V, 220 V, 230 V, and 240 V).
• All platesetters that are currently waiting to be installed at customer sites will be visually inspected by the local service engineer/technician prior to the installation to verify that all wires in the back of the D-box are securely connected (on both sides of the terminal block), as shown below.