Product

• Magnus VLF
• Magnus VLF MCU
• Magnus VLF CL

Machines affected

All

Component

Universal Debris Removal Cabinet (UDRC)

Error

43014: The debris hose is disconnected, the cabinet has lost power, or the cabinet lid is not latched properly

Symptoms

The debris removal system does not respond. Note: There is no serial control cable to the UDRC, only an on/off signal sent via K2 control.

Cause/Solution

• Fuse blown (F1/F2). Replace CB3 breaker.
• Power cable disconnected at bulkhead near debris cabinet. Reconnect the cable.
• No line power (line 2) to debris/MCU (if installed). Connect power to line 2.
• Lid not closed (switch problem) - signal is fed to the Lionel 0 board. Check that lid is closed and that the switch is working.
• K2 relay has failed. Replace relay.

Technical contact(s)

Micle Zisman

Submitted by

Christopher St.Louis

Date submitted

31 Dec 2004