Magnus VLF - Unexpected plate at processor

Unexpected plate at processor - error 45902
MDHEJECT: No plate was expected to be at the processor but one was found. Check for processor malfunction.


Product		Magnus VLF MCU Magnus VLF CL

Machines affected		All

Error		45902: MDHEJECT: No plate was expected to be at the processor but one was found. Check for processor malfunction.

Symptoms		As the plate is being fed into the processor by the ejector, this error can occur. On eject, the plate will bounce up and down.

Cause		Depending on the height of the processor and the size of the plate, the plate can lift off the optical sensor at the end of the bridge during the eject sequence. The MCE will see the plate off the bridge and when the plate falls back on the bridge, this error can occur.

Solution		The plate processor height must be between 95 mm(37.4 in.) to 102 mm(40.1 in.).

Technical contact(s)		Micle Zisman
Submitted by		Christopher St.Louis
Date submitted		31 Dec 2004