Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Product |
Magnus VLF MCU | ||
Component |
MCU |
||
Error |
Cassette did not reach desired position. | ||
Symptoms |
When the MCU initializes or after a cassette load, the device states that the motor is turning (in Service Shell), but it is not. You can also see that the motor converter leds are off. | ||
Cause/Solution |
Cause: the F6 fuse has blown on PDB 1 (aka spare safety).
Solution: Replace the fuse—there may be spares on the PDB). |
||
Technical contact(s) |
|||
Submitted by |
|||
Date submitted |
19 Feb 2005 |
||