Product

Magnus VLF MCU and CL

Machines affected

Magnus VLF devices with TH3.

Symptoms

Circuit breaker CB1 trips while running Power and SD series.

Cause

CB1 trips due to an inrush current while performing Power and SD Series when the drum was stopping and accelerating between strips @ 350+ RPM.
This problem has not been seen during normal imaging operations.

Solution

To resolve this problem, run TPA Power and SD Series with the option "Leave drum spinning between strips" enabled.

Technical contact(s)

Micle Zisman

Submitted by

Micle Zisman

Date submitted

03 May 2007