Home | Contact Us | Submit Troubleshooting Info | Search | Help


    Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS


Air Filter Regulator Assembly - VLF Devices


Description | Location | NVS Parameters | Parts | Procedures


Description

The Filter/regulator assemblies regulate, filter, and dry the customer's compressed air supply.

Clogged filters can cause air pressure problems resulting in dropped plates by the plate picker in automatic machines. Filter failure can also damage the device's air system and allow contaminants to enter the device.

Note: It is critical for long-term performance of the device that the filters be changed at specified intervals.
For filter parts, see Replacement Filters.

Location

Parts


Magnus VLF | ThermoFlex Wide | ThermoFlex Wide II | Trendsetter VLF | Trendsetter VLF AL | VLF Platesetter

ThermoFlex, Trendsetter VLF, and VLF Platesetter

ThermoFlex Wide II

Trendsetter VLF Autoloader

Magnus VLF

TH2 Filter/Regulators for Series 1 devices

If Series 1 filter/regulator parts are no longer available, replace with whole assembly with 500-02469B.

Item Stored Service Parts Reference Notes/photos
Filter regulator assembly 500-02469A    
Filter kit 328-00001    
Filter bowl 55-1280    
Silencer 55-1271    
Air pressure gauge 342-00067    
Regulator 334-00118    
TH2 Filter/Regulators for Series 2 devices

Magnus VLF devices that were manufactured as series 2 devices include the following: MT149, MT150, and MT159 onwards with the exception of MT164.

Item Stored Service Parts Reference Notes/photos
Filter regulator assembly 500-02469B BOM | DWG  
Filter kit 328-00001    
Filter bowl 55-1280    
Micro-mist filter
   Replacement cartridge
332-00025
332-00028
500-02469  item 60  
Silencer 55-1271 500-02469  item 20  
Air pressure gauge 342-00067 500-02469  item 120  
Regulator 334-00118 500-02469  item 80  
TH3 Filter/Regulators for Series 2 devices

For Magnus VLFs with a TH3, a slight hissing sound can be heard coming from the filter/regulator assembly's compressed air dryer. This sound is normal and is caused by air being purged from a small hole in the tube to expel moisture.

Item Stored Service Parts Reference Notes/photos
Filter regulator assembly 500-02470C BOM | DWG  
Filter kit 328-00001    
Filter bowl 55-1280    
Micro-mist filter
   Replacement cartridge
332-00025
332-00028
500-02469  item 60  
Silencer 55-1271 500-02470  item 20  
Air pressure gauge 342-00067 500-02470  item 120  
Regulator 334-00118 500-02470  item 80  
TH3 pneumatic filter assembly 500-03794B BOM | DWG Contains adsorption filter, micro-mist filter, and regulator
Adsorption filter assembly 332-00015 500-03794  item 40 For replacement filter, order filter kit 332-00027
Micro-mist filter assembly 332-00016 500-03794  item 50 For replacement filter, order filter kit 332-00027
TH3 pneumatic replacement filter kit 332-00027   Always replace both filters if one needs to be replaced
Regulator 55-0648 500-03794  item 130  
Pressure switch 172-00064 500-03794  item 30  

For other replacement Filters - see Magnus VLF Replacement Filters

NVS Parameters (MPE)

AL module: ast, aso

Procedures

See maintenance procedures in Operator Manuals.

See also Manufacturers precautions.


    Copyright © 2005 Creo Inc. All rights reserved. Confidential. Back to top.