Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
| Applies to: | ThermoFlex | Priority = Next visit |
| Reason = Blower motor overheating | ||
| Release date = 13 July 1999 | ||
| Machines affected | All | |
| Component | Chassis | |
| Description | The blower motor windings for the filter unit do not maintain a low enough temperature to meet the CE specification. | |
| Parts needed | Kit 05-0121 | |
| Procedure | Motor cooling upgrade procedure ThermoFlex Debris Motor Cooling Upgrade | |
| Action Required | The airflow path must be redirected to exhaust out the rear panel, instead of beneath the unit, as is currently done. This involves replacing some sheetmetal parts and foam sound deadening inside the enclosure. | |
| Date submitted | 13 July 1999 | |