Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
Home | Contact Us | Submit Troubleshooting Info | Search | Help
Output | Software Solutions | Proofing | Color, Screening and Calibration | Scanning | Digital Photography | Consumables | POS
| Applies to: | ThermoFlex | Priority = Next Site Prep |
| Reason = Imaging artifacts | ||
| Release date = 30 Sept, 1999 | ||
| Machines affected | All | |
| Component | Engine | |
| Description | The motor mount stiffener must be installed on the engine to eliminate a particular imaging artifact caused by vibration of the motor mount, which causes drum jitter | |
| Parts needed | Upgrade Kit 05-0129 BOM | |
| Procedure | ThermoFlex 1.7x Motor Mount Stiffener Installation procedure: 72-3357A Motor Mount Stiffener Installation Drawing: 05-0129 DWG |
|
| Action Required | Install the vibration damper upgrade kit per the vibration damper installation procedure. | |
| Date submitted | 30 Sept, 1999 | |